Control X is the smartest and sleekest CZone module, and the first with a fully waterproof enclosure.

• Ignition Protected IPX7 fully waterproof enclosure
• RGBW light controller
• Wiper Motor control with synchronization
• Configurable I/o channels for ultimate flexibility
• Manual Override touch panel
• Multiplex switch inputs
• Moulded in Deutsch receptacles

Meet CZone’s first dedicated digital switching and integration module for recreational and specialty vehicles.

• 36 Output and 8 Reversing Motor (H-Bridge) channels
• 32 Signal Inputs for 0-32V, 0-1000Ω sensors and pos/neg switches
• Current monitoring, software fusing and low/run current detection all outputs
• Internal battery monitoring (SOC, Volts, Amps, Time Remaining)
• 12/24V system support and sleep mode (<5mA)
• Auto Generator Start and Load Shedding capabilities
• Automatic Climate Control

The Combination Output Interface (COI) combines multiple input and output devices in to one module, simplifying installation and delivering best value per circuit.

• 16 x Output Channels (4 x 25A, 12 x 10A Dimmable)
• 8 x Analogue Inputs: Positive or Negative Switching, 0-32Volt, 0-1000 ohms resistance and 4-20mA Current
• 6 x Digital Inputs w Systems On/Backlighting via breakout harness
• 150A Maximum current
• Programmable software 'fuse' sizes, plus backup mechanical fuse and bypass on all circuits as required by ABYC/CE

The Contact 6 PLUS is a robust and affordable digital switching solution which can be networked into an existing CZone system or installed standalone with keypads or displays.

• Circuit dimming & smooth start capability
• Status LEDs for all outputs
• Ultra low current draw
• Built-in timer functions for circuits like live bait tanks
• Voltage monitoring on the NMEA 2000 Network
• Built-in Load Shedding
• Built-in default configurations selectable via dip switch
• Blown fuse detection and warning

The Contact 6 is a digital control module that can be used for controlling generators, battery switches, lights and reversing motors (for shades, vents, lifts, and more).

• 6 x 7.5A dry contact relays with internal auto-resetting PTC fuses
• IPX5 water ingress protection
• NMEA 2000 compatible

The Control 1 combines multiple input and output devices into a single module, simplifying installation.

• Equipped with advanced core CZone feature set
• ABYC compliant ATC fusing and mechanical bypass for redundancy
• PWM light dimming capability & smooth start
• Monitor tank levels, battery volts, temperature and pressure using industry standard sensors
• Bilge Pump Run Detection allows pump control and monitoring from a single wire
• Additional volt monitoring on main DC connection
• In-built load shedding allows non-necessary loads to be turned off to preserve battery life

The DDS is an extremely compact and affordable digital switching module boasting 40 channels.

• 12 or 24V system voltage (60A max)
• NMEA 2000 interface
• 12 Relay channels with mechanical fuse bypass
• 5 MOSFET channels with Over-Current Protection
• 3 Analog Inputs (Voltage or Resistance)
• 5 Positive/Negative Digital Outputs and Inputs
• 5 Positive Digital Outputs and Inputs
• Advanced bilge pump functionality on all relay output channels
• Automotive mini fuses (ATM fuses)